Uxcell 5Stück 0,4mm 3D Drucker Düsen Kopf M7 Gewinde Ersatz für MK10 1,75mm Extruder Druck Messingdüsen

• [Größe]: Gewinde: M7; Düsendurchmesser: 0,4 mm; Eingangsdurchmesser: 4 mm; Gesamtabmessung: 13 x 9 mm / 0,5 „x 0,35“ (L * D)
• [Kompatibilität]: Kompatibel mit 1,75mm Filament MK10 3D Druckern.
• [Messingmaterial]: Nicht leicht zu verrosten lassen oder erodieren, bietet lange Lebensdauer.
• [Glatte Oberfläche]: Die glatte Kontaktoberfläche kann gut mit dem anderen Kopf des heißen Endes verbunden werden, um Ausschwitzen zu vermeiden und einen glatten und sauberen Druck zu erzielen.
• [Anwendung]: Geeignet für die meisten nicht abrasiven Materialien wie PLA, ABS, Nylon, TPE, TPU, PC usw.

Feature:

Stamp size on surface, convenient to pick the one you need.

The hole of print nozzle is consistent size and machining, the thread is clean and well formed.

Extruder brass print heads are usually applied to print non-abrasive material filaments such as PLA, ABS, Nylon etc.

Specification:

Material: Brass

Screw Thread: M7

Nozzle Diameter: 0.4mm

Input Diameter: 4mm

Total Dimension: 13x9mm / 0.5×0.35 inch (L*D)

Package Content:

5 x Brass Nozzle

NOTE:

Small accessories, please keep away from
children
.

After replacing the nozzle, please recalibrate the distance between nozzle and build plate to ensure the quality of print parts.

How to Replace Nozzles?

1: Turn on 3D printer, heat the nozzle and heat block to the target temperature (PLA: 180-220, ABS: 240-280).

2: After heat finishing, close printer, take spanner to hold the heat block. Then use socket screwdriver to screw old nozzle extruder out.

Notice: Please don’t touch the old nozzle and heat block to avoid burning.

3: Spanner keep to hold the hear block, use the socket screwdriver screw the new nozzle in, make sure tight.